L3200D Manual Transmission

L3200D Manual Transmission

L3200D

Manual Transmission

If you’re looking for a general purpose, mid-sized tractor that is durable, comfortable and high performing, you simply can’t go past the Kubota L3200D. Powered by Kubota’s own 26.7 PTO HP engine and featuring a mechanical shuttle transmission, the Kubota L3200 is incredibly powerful yet simple to operate. Loaded with features to increase productivity, comfort and durability, the Kubota L3200D has been specifically designed to go the distance, providing you with years of economical and dependable use.

View Brochure

LD3200 Specifications

L3200DL3200HD
EngineTypeIndirect injection, vertical, water-cooled 4-cycle dieselIndirect injection, vertical, water-cooled 4-cycle diesel
Engine gross power HP (kW)31.9 (23.8)31.9 (23.8)
Engine net power HP (kW)30.4 (22.7)30.4 (22.7)
PTO power HP (kW)26.7 (19.9)25.2 (18.8)
No. of cylinders33
Bore & stroke (mm)83 x 92.483 x 92.4
Total displacement (cm³)14991499
Rated speed (rpm)28002800
Battery12V, RC: 123 min, CCA: 490 A12V, RC: 123 min, CCA: 490 A
Alternator12V, 40A12V, 40A
Fuel tank capacity (L)3838
PTORear PTO typeTransmission driven with overrunningLive-continuous running
PTO/Engine speed540/2430540/2580
HydraulicLift control typePosition controlPosition control
Main pump capacity (L/min)26.626.6
PS pump capacity (L/min)15.015.0
3-point hitchCategory ICategory I
Lift capacity at lift points (kg)906906
Lift capacity 24 in. behind lift points (kg)651651
System pressure kgf/cm² (MPa)160 (15.7)160 (15.7)
Travelling SystemTransmissionGear shift, 8 forward and 4 reverseHydrostatic transmission, 3 range speed
SteeringIntegral type power steeringIntegral type power steering
BrakeWet disc typeWet disc type
ClutchDry type single stageDry type single stage
Tyre sizeAG (Standard) Front7-167-16
AG (Standard) Rear11.2-2411.2-24
Turf (Optional) Front212/80-D15212/80-D15
Turf (Optional) Rear355/80-D15355/80-D15
Industrial (Optional) Front27 x 8.50-1527 x 8.50-15
Industrial (Optional) Rear15-19.5 R415-19.5 R4
Travelling speed with standard AG tyresForward (km/h)1.8 – 22.00.0 – 23.6
Reverse (km/h)2.4 – 7.90.0 – 21.2
DimensionsOverall length (w/o 3P) mm27002700
Overall width (min. tread) mm14001400
Overall height (w/Foldable ROPS) mm23302330
Wheelbase (mm)16101610
Min. ground clearance (mm)340340
Front tyre tread (mm)10951095
Rear tyre tread (mm)1115 / 1195 / 12901115 / 1195 / 1290
Min. turning radius (w/brake, 4WD disengaged) m2.52.5
Weight (with ROPS) kg11801190

 

LD3200D Loader Specifications

LA524AU
Matching TractorL3200 / L3800
Maximum Lift Height (Pivot Pin) mm2394
Clearance with bucket dumped (mm)1795
Reach@maximum height (Dumping Reach) mm589
Maximum Dump Angle (deg.)40
Reach with bucket on ground (mm)1796
Maximum Roll Back Angle (deg.)45
Digging Depth (mm)288
Overall Height in Carrying Position (mm)1427
Lift Capacity (500 mm Forward, Max Height) kg400
Bucket Roll-Back Force (Max Height) N5259
Bucket Roll-Back Force (1500 mm) N7903
Bucket Roll-Back Force (Ground Level) N9084
Raising Time (Rated Flow) sec.3.3
Lowering Time (Rate Flow) sec.2.1
Bucket Dumping Time (Rated Flow) sec.1.4
Bucket Roll-Back Time (Rated Flow) sec.1.7

 

LD3200D Back Hoe Specifications

BH77
Matching TractorL3200 / L3800
Transport height (mm)2040
Stabilizer spread – transport (mm)1315
Stabilizer spread – operating (mm)1753
Ground clearance (mm)292
Digging Depth 2ft flat bottom (mm)2349
Operating height fully raised (mm)3010
Loading height (mm)1680
Reach from swing pivot (mm)3156
Swing pivot to rear axle centre line (mm)954
Bucket rotation (deg.)180
Angle of departure per SAW J1234 (deg.)17.5
Swing arc (deg.)180
Digging Force using Bucket Cylinder (kgf)1552
Digging Force using Dipperstick Cylinder (kgf)993

Short Description

Categories: ,
Share on: