L3540HDA
Premium ROPS Tractor
The Kubota L3540HDA tractor is best suited to the operator looking for a mid-sized tractor that offers premium performance, versatility and comfort. Powered by Kubota’s 35HP, 3 cylinder diesel engine and HST Plus transmission, the L3540HDA delivers high performance and professional results for tasks both small and large. Expect top of the line features, including Intelli-Panel, Kubota’s unique tractor monitoring system and luxury reclining seating for ease of operation and comfort during those long hours of operation. Available with a number of attachments, you will come to rely on the L3540HDA, boosting your versatility, efficiency and productivity.
View BrochureL3540HDA Specifications
| L3540HDA | ||
|---|---|---|
| Engine | Type | E-TVCS, indirect injection, vertical, liquid-cooled 4 cycle diesel |
| Engine gross power HP (kW) | 37.0 (27.6) | |
| Engine net power HP (kW) | 35.0 (26.1) | |
| PTO power | 28.0 (20.9) | |
| No. of cylinders | 3 | |
| Aspiration | Natural | |
| Bore & stroke (mm) | 87 x 102.4 | |
| Total displacement (cc) | 1826 | |
| Rated speed (rpm) | 2700 | |
| Battery | 12V, RC: 133 min, CCA: 582A | |
| Alternator | 12V, 40A | |
| Fuel tank capacity (L) | 44 | |
| PTO | Rear PTO Revolution | 1 speed: 540 rpm |
| Rear PTO Type | Independent | |
| Mid PTO | Option | |
| Mid PTO Revolution | 1 speed: 2000rpm | |
| Hydraulic | Lift control type: Position | Standard |
| Lift control type: Draft | Option | |
| Implement pump (L/min.) | 31.5 | |
| Power steering pump (L/min.) | 18.6 | |
| Total hydraulic flow (L/min.) | 50.1 | |
| 3-point hitch | Category I | |
| Lift capacity at 24 in. behind lift point (kg) | 1200 | |
| Travelling System | Transmission | HST Plus (3 Ranges) |
| Steering | Hydrostatic power steering | |
| Brake | Wet disc type | |
| Clutch | Dry type single stage | |
| Standard Tyre Size | Front | 7.0 – 16 |
| Rear | 12.4 – 24 | |
| Travel Speeds (HST Plus) km/h | H-DS L Forward L M H |
3.5 7.1 15.0 |
| H-DS L Reverse L M H |
3.1 6.4 13.5 |
|
| H-DS H Forward L M H |
5.8 11.8 25.0 |
|
| H-DS H Reverse L M H |
5.2 10.6 22.5 |
|
| Dimensions | Overall length (w/o 3P) mm | 2950 |
| Overall width (min. tread) mm | 1520 | |
| Overall height (w/Foldable ROPS) mm | 2385 | |
| Wheelbase (mm) | 1805 | |
| Min. ground clearance (mm) | 350 | |
| Tread | Front (Front tyre) mm | 1150 |
| Rear (Rear tyre) mm | 1200, 1300, 1385, 1480 | |
| Min. turning radius (w/brake, 4WD disengaged) m | 2.7 | |
| Weight (with ROPS) kg | 1540 | |
L3540HDA Loader Specifications
| LA714AU | ||
|---|---|---|
| Maximum Lift Height (Pivot pin) mm | 2597 | |
| Clearance with Attachment Dump (mm) | 1995 | |
| Reach @ Maximum Height (mm) | 561 | |
| Maximum Dump Angle (deg.) | 45 | |
| Reach with Attachment on Ground (mm) | 1763 | |
| Maximum Rollback Angle (deg.) | 46.5 | |
| Digging Depth (When Bucket is level) mm | 122 | |
| Overall Height in Carry Position (mm) | 1525 | |
| Square Bucket Width / Struck Capacity mm/m3 | 1675 / 0.23 | |
| Lift Capacity (500mm forward) kg | 600 | |
| Raising Time to Full Height without Load (sec.) | 3.4 | |
| Lowering Time without Load (powerdown) sec. | 2.1 | |
| Attachment Rollback Time (sec.) | 1.6 | |
| Attachment Dumping Time (sec.) | 1.2 | |
| Rated Flow (L/m) | 37 | |
| Relief Valve PSI (kg/cm2) | 185 | |
| Specs taken from | L4240-3 | |
L3540HDA Mid-Mount Mower Specifications
| RC72-38 | ||
|---|---|---|
| Matching Tractor | L3240 / L3540 | |
| Mounting Method | Parallel linkages | |
| Adjustment of Cutting Height | Gauge wheel | |
| Cutting Width | 72″ | |
| Cutting Height | 1.5″ – 4.5″ | |
| Weight (approximate) kg | 210 | |
| Blade Spindle Speed | 49.7S – 1/2980rpm | |
| Blade Tip Velocity | 81.4 ft./sec | |
| Blade Length (mm) | 625 | |
| Number of Blades | 3 | |
| Direction of Discharge | Right side | |
L3540HDA Back Hoe Specifications
| BH77 | ||
|---|---|---|
| Maximum Digging Depth (mm) | 2370 | |
| Swing Arc (deg.) | 180 | |
| Loading Height (mm) | 1703 | |
| Reach from Centreline of Wing Pivot (mm) | 3130 | |
| Reach from Centreline of Rear Axle (mm) | 4118 | |
| Transport Height (mm) | 2075 | |
| Bucket Rotation (deg.) | 180 | |
| Transport Overhang (mm) | 1187 | |
| Undercut from Centreline (mm) | 490 | |
| Hydraulic Stabilizer Spread, Down (mm) | 1712 | |
| Hydraulic Stabilizer Spread, Up (mm) | 1315 | |
| Digging Force Using Bucket Cylinder (kg) | 1693 | |
| Digging Force Using Dipperstick Cylinder (kg) | 1084 | |
| Bucket Sizes | 16″ | |
| Specs Taken from | L3540 | |