The RTV300 is designed to fit into most rugged terrain vehicle tubs or in the back of a ute.
Designed with operator safety and convenience in mind the RTV300 features a forward mounted 300L chemical tank for extra stability. In addition a rear mounted single 100m Pro-Reel® is fitted and provides a compact layout suited to most RTV vehicle tubs.
The petrol engine driven pump is rated at 40 l/min @ 40 bar (580psi), this allows the operator to apply large volumes of chemical over a large area in a very short amount of time. Excess flow from the pump is used to keep the chemical tank well agitated, ensuring a good even chemical to water mix at all times.
The unit is also available in stand-alone configuration with an electric start engine, petrol can holder and handwash tank with soap dispenser. RTV300 PRO
Range
300L Pro-Reel® RTV300 “Work Ready”
300L Pro-Reel® RTV300 “Professional”
Hose Reel
The Pro-Reel® is a remote controlled automatic rewind hose reel that is powered by a 12 volt motor completely removing the need to manually wind up the hose after completing your spraying tasks. The Pro-Reel® will make your spraying simpler, safer and quicker.
Features
- 2 channel radio receiver (200m range)
- 12dc motor with adjustable v-belt
- Anti-corrosion poly reel plates
- A swivel hose feeder with 360º rollers evenly distribute the nylon hose
- High flow stainless steel internal inlet shaft with stainless external hardware ensure the reel can withstand the harshest environments
Pro-Reel® key features
Control system
A powerful two channel radio receiver (433 MHz FM) with a 200m range controls the Pro-Reel® rewind function. the remote features a single button motor shutdown for emergencies whil a manual override switch allows the hose to be rewound if the remote loses power, is damaged lost.
Nylon 12 hose
Nylon 12 hose is the toughest, anti kink hose available. With an OD of 8mm and a thin wall it enables 50, 100 or 150 metres of hose to neatly fit to the reel while providing minimal pressure loss. This hose is Ideally suited to the pro reel due to it’s high pressure rating and super slip outer surface.
Motor
A simple 12 volt, 150w high torque motor is used which draws 16amps and drive at 450 rpm. The motor drives the reel via a simple V belt configuration at around 6 klm/hr which is a comfortable walking speed.
Controller
A quality Udor 3 way manual controller is used which features pressure regulation and a complete bypass flow dump valve for easy engine starting and precise pressure adjustment. The controller will handle up to 120 l/min of flow and 580 psi pressure.
Turbo 400 gun
The turbo 400 gun is used across the range and it handles up to 70l/min of flow and 700 psi of pressure. It features a trigger lock handle with an easy adjustment lever from a straight stream to a fan. A hose swivel is fitted to eliminated hose tangles.
Fuel tray*
Handy Jerry can tray, holds a 5 litre Jerry can, max size of 270 x 190mm. *Jerry can not included
Motor / pump
Quality Udor high pressure diaphragm pumps are used across the range. The pumps are perfectly matched to suit the desired tank size and sprayer configuration and are coupled to the Honda engine via a 6:1 reduction gearbox. This pump and motor combination delivers an excellent mix of reliability, pressure and spray volume. The engine has a 3 year warranty. (Jerry can not inluded)
Pro-Reel® “Professional” features
23L handwash tank
As an added safety and convenience the Pro-Reel®RTV300 is fitted with a hand wash tank which also incorporates a removable soap dispenser.
Battery*
No need to run a battery cable all the way to your vehicles engine bay with this convenient battery tray, max size battery of 220 x 145mm. *Battery standard on “Pro” model
Motor / pump
Quality Udor high pressure diaphragm pumps are used across the range. The pumps are perfectly matched to suit the desired tank size and sprayer configuration and are coupled to the Subaru EX17 engine via a 6:1 reduction gearbox. This engine has a high capacity electrical charging circuit to meet the electrical needs of the Pro-Reel®. This pump and motor combination delivers an excellent mix of reliability, pressure and spray volume. The engine has a 3 year warranty. (Jerry can not included)
Top mount bottom fill
The top mount bottom fill enables the sprayer to be filled from a safe working height. Located at the side of the unit, the top mount bottom fill eliminates the need to fill the sprayer through the lid, greatly improving safety and ease of filling. A drop hose is fitted inside the sprayer tank to reduce foaming while filling.
Dimensions
Dimensions | W (mm) | L (mm) | H (mm) |
---|---|---|---|
300L | 1353 | 1147 | 1010 |
Specifications “Work Ready”
Feature | Description |
---|---|
Hose length | 100m |
Tank size | 300 Litres |
Engine | Honda GX200 manual start |
Pump | Udor 40 l/min 580 psi twin diaphragm |
Controller | Manual 3 way, manual pressure adjustment with dump valve |
Remote rewind | 200m range 12v dc electric motor 150w 450 rpm 16 amp draw |
Remote shutoff | Remote engine and pump shut-off 200m range |
Site tube | Standard |
Spray gun | Turbo 400, adjustable spray pattern |
Suction filter | 50 mesh with shut-off |
Chassis | Fully welded RHS / tubular construction |
Hose reel drive system | 12v dc motor with adjustable v-belt |
Nozzle sizes | 1.5, 2.0, 2.5, 3.0 and 3.5mm (2.5mm standard) |
Reel | Anti-corrosion poly disc, stainless inlet shafts an external hardware |
Specifications “Professional”
Feature | Description |
---|---|
Hose length | 100m |
Tank size | 300 Litres |
Engine | High electrical capacity Subaru Electric start 6hp self-contained |
Battery | Standard |
Pump | Udor 40 l/min 580 psi twin diaphragm |
Controller | Manual 3 way, manual pressure adjustment with dump valve |
Remote rewind | 200m range 12v dc electric motor 150w 450 rpm 16 amp draw |
Remote shutoff | Remote engine and pump shut-off 200m range |
Site tube | Standard |
Handwash tank | Standard |
Spray gun | Turbo 400, adjustable spray pattern |
Suction filter | 50 mesh with shut-off |
Chassis | Fully welded RHS / tubular construction |
Hose reel drive system | 12v dc motor with adjustable v-belt |
Nozzle sizes | 1.5, 2.0, 2.5, 3.0 and 3.5mm (2.5mm standard) |
Reel | Anti-corrosion poly disc, stainless inlet shafts an external hardware |